|Lugar ng Pinagmulan:||Tsina|
|certification:||ISO9001, ROHS, CE|
The dummy load is a terminator that absorbs all incident wave power, so it is equivalent to a characteristic impedance line connected to the terminal. Common matching loads include waveguide matching loads and three-plate line matching loads. Compared with the partial absorption of energy by the attenuator, the matched load absorbs all the energy and the frequency band is wide enough. The resistance value of the coaxial matched load is usually 50Ω.
Low PIM RF Dummy Load widely used for network installation and T&M applications, the load also called cable load, cause it is made of low PIM cable like RG141. Also the load has different power rating from low to high, Topwave model TPW-LPT50-740-160-41M, it is a 50W wideband 698-4000MHz with low PIM -160dBc in 4.3-10 type connectors
|PIM(dBc)||[protektado ng email]|
|Rating ng Power(W)||50W (average power per port)|
|Operating Tem(℃)||-25°C upang + 50°C|
|Mga Dimensyon (mm)||See mechanical Drawing|
Pagsunod sa ROHS at CE
Garantisadong PIM Garantisado -160dBc
Malawak na Dalas na Band na sumasaklaw sa 698-4000MHz
Mababang Pagkawala ng Insertion at Mababang VSWR
Available sa Type N, 7/16DIN o 4.3/10 Connectors
Malawak para sa Distributed Antenna(DAS) Solutions.
Well-installed sa In-building System (IBS)